You can contact us any way that is convenient for you
Cangzhou Great Drill Bits Co.,Ltd.
Cangzhou Great Drill Bits Co.,Ltd.
Contact Us
Application Maintenance of Tricone Bit

Application Maintenance of Tricone Bit

The tricone produced and processed by the tricone bit manufacturer is mainly used in oil drilling. This product can improve the efficiency of oil drilling and at the same time save the cost of drilling to a large extent. Tri-cone is an important mining tool in the oil drilling industry. It is mainly used in a relatively wide stratum environment. This product has a strong horsepower supply and a high rotation rate. It can extract rocks and improve the efficiency of oil wells.

Ⅰ. Precautions for using tricone bit

1. The drill bit of the tricone bit should be kept clean at all times, and the mined mud should be surveyed in advance;

2. Pay attention to the fixing of the gear when installing and uninstalling the tricone bit. The drill bit must not be loose at all, otherwise it will affect the service life of the product;

3. In the process of using tricone bit for oil well production, the frequency of the drilling speed should be controlled, so that the resistance of the rock can be alleviated, and the drill bit will not damage;

4. In the process of using tricone roller bit, the water volume of the water pump should be kept sufficient at all times to provide a good power supply for the drill bit.

Ⅱ. How to maintain and protect tricone bit?

1. When it is drilling steel parts, please ensure sufficient cooling and use metal cutting fluid.

2. Good drill pipe rigidity and rail clearance can improve the accuracy of drilling and the life of the tricone bit.

3. Please ensure that the magnetic base and the workpiece are level and clean.

4. When drilling thin plates, reinforce the workpiece, and when drilling large workpieces, please ensure the stability of the workpiece.

5. At the beginning and end of drilling, the feed rate should be reduced by 1/3.

6. For materials that have a large amount of fine powder during drilling, such as cast iron, cast copper, it is possible to use compressed air to help chip removal without using coolant.

7. Please clean up the iron filings wound on the drill body in time to ensure smooth chip removal.

Related News